Onga Enviromaster
Pentair Water Australia and New Zealand are proud to announce the release of the Onga Enviromaster variable speed pump. The pump incorporates an integrated energy saving inverter; the latest innovation from Pentair Water. The inverter adjusts the speed of the pump so as to constantly provide users with the same pressure, even when demand for water changes. Because the pumps speed depends on water demand, when running at reduced speeds, it is possible to save up to 75%* of power, compared to a standard pump of the same size. With the ever increasing cost of electricity, over time, this pump will pay for itself, not to mention the environmental benefits of reducing energy and global warming.
*based on pump affinity laws
|
The pump itself is a horizontal multistage, capable of providing flows up to 120 lt/min and has a maximum head of 60 metres; big enough for the largest household and capable of providing ample pressure for irrigation and industrial use. The pump casing and shaft are 304 S/S to ensure reliability. The suction and discharge are 1” BSP for ease of installation. |
 |
 |
The inverter has a standard 230 V input via a 3 pin plug, no extra wiring required. The setup can be as simple as a one touch pressure setting; however, it has the capability to be programmed for 2 set point pressures as well as specific parameters to meet almost every hydraulic situation. | Integrated Inverter
The pump is sold separately or as a kit, which consists of the pump, 8 litre stainless steel pressure tank, 5 way tee, cap and tape. Part numbers and list price are as follows;
|
